B&R Industries Automation PC 620, User Manual

Page: 196 / 512

196
Commissioning • Connection examples - Automation Panel 900
Automation PC 620 User's Manual V 1.90
3.6 Configuration - Two Automation Panels via SDL and SDL (optional)
An Automation Panel (max. UXGA) is connected to the integrated SDL interface via an SDL
cable. A second Automation Panel (max. UXGA) is connected to the optional SDL transmitter
via an SDL cable. The Automation Panels show different content (Extended Desktop) and can
be different types.
3.6.1 Basic system requirements
The following table displays the possible combinations for the APC620 system unit with CPU
board to implement the configuration shown in the figure above. If the maximum resolution is
limited when making the combination then it is also shown in this table (e.g. for connecting a non-
B&R Automation Panel 900 device).
Figure 92: Configuration - Two Automation Panels via SDL and SDL (optional)
CPU board
with system unit Limitation
Resolution
5PC600.SX01-00 5PC600.SX02-00 5PC600.SX02-01 5PC600.SX05-00 5PC600.SX05-01
5PC600.E855-00 -
✓
-
✓
- Max. UXGA
5PC600.E855-01 -
✓
-
✓
- Max. UXGA
5PC600.E855-02 -
✓
-
✓
- Max. UXGA
5PC600.E855-03 -
✓
-
✓
- Max. UXGA
5PC600.E855-04 -
✓
-
✓
- Max. UXGA
5PC600.E855-05 -
✓
-
✓
- Max. UXGA
Table 127: Possible combinations of system unit and CPU board
Automation PC 620
with AP Link
5AC600.SDL0-00
SDL segment length
max.40 meters
Link: 5DLSDL.1000-00
✓
USB OK
Link: 5DLSDL.1000-00
✓
USB OK
0
8
Graphics Engine 1
Graphics Engine 2
x Internal APC620 panel number
SDL segment length
max.40 meters
AP Link
connection
Monitor / Panel
connection