B&R Industries Automation PC 620, User Manual

Page: 73 / 512

Technical data • Entire device
Chapter 2
•
Te
chn
ica
l da
ta
73 Automation PC 620 User's Manual V 1.90
2.9.5 USB port
The APC620 devices have a USB 2.0 (Universal Serial Bus) host controller with multiple USB
ports, two of which are on the outside for easy user access.
Driver support
For optimal functionality of USB 2.0 (transfer speed up to 480 Mbit/s) with Windows XP, at least
Service Pack 1 must be installed. Without the Service Pack, Windows XP will only support USB
1.1.
USB 2.0 comes already integrated in B&Rs XP embedded operating systems.
Universal serial bus
Transfer rate Low speed (1.5 MBit/s), full speed
(12 MBit/s), to high speed (480 Mbit/s)
2x USB Type A, female
Power supply max. 500 mA per Port
1)
1) For safety, every USB port is equipped with a maintenance free “USB current-limiting circuit breaker“ (max. 500 mA)
Maximum
cable length 5 m (not including hub)
Table 28: USB port
Warning!
Peripheral USB devices can be connected to the USB interfaces. Due to the vast
number of USB devices available on the market, B&R cannot guarantee their
performance. B&R does assure the performance of all USB devices that they
provide.
Important!
Because of general PC specifications, this interface should be handled with extreme
care with regard to EMC, location of cables, etc.