B&R Industries Automation PC 620, User Manual

Page: 80 / 512

80
Technical data • Entire device
Automation PC 620 User's Manual V 1.90
SDL (Smart Display Link) means:
• Connection of B&R Automation Panel 900 display units with Automation Panel Link SDL
receiver (Model nr. 5DLSDL.1000-01) or SDL transceiver (Model nr. 5DLSDL.1000-01).
For examples and possibilities for connecting Automation Panel 900 display units via SDL, see
Appendix A, Chapter 3 "Commissioning", Section 3 "Connection examples - Automation Panel
900", starting on page 176.
2.9.8 MIC, Line IN and Line OUT Port
All APC620 systems include an AC97 (specification 2.2) compatible sound chip with access to
the channels MIC, Line IN and Line OUT from the outside.
Driver support
Special drivers are necessary for operating the AC97 sound chip (Realtek). Drivers for Windows
XP Professional and Windows XP Embedded are available for download on the B&R homepage
in the download area (
www.br-automation.com ).
Figure 26: Monitor / Panel connection with SDL video signal
MIC, Line IN and Line OUT
Controller Realtek AC97 3.5 mm socket, female
MIC Connection of a mono microphone with
a 3.5 mm stereo (headphone) jack.
Line IN Stereo Line IN signal supplied via
3.5 mm plug.
Line OUT Connection of a stereo sound reader
(e.g. amplifier) via a 3.5 mm plug.
Table 36: Technical data - MIC, Line IN and Line OUT port
Automation Panel 900
Automation Panel Link SDL receiver or SDL transceiver
5DLSDL.1000-00 or 5DLSDL.1000-01
Automation PC 620