B&R Industries Automation PC 620, User Manual

Page: 298 / 512

298
Software • Automation PC 620 with BIOS
Automation PC 620 User's Manual V 1.90
ACPI control
Enable PME for
WOL This option enables the PME (Power
Management Event) signal for controlling
the WOL (Wake On LAN) function for the
operating system.
This setting affects both Ethernet
interfaces (ETH1 and ETH2). OS control Evaluation of the PME signal is only active if it has
been accordingly activated in the operating
system driver. The system can only be woken up
from the S4: hibernate mode - Suspend-to-Disk
status.
Enabled The function, WOL and the evaluation of the PME
signal is always enabled.
Disabled Disables the function - no WOL possible.
Figure 150: 855GME - ACPI control
BIOS setting Description Setting options Effect
Active trip point With this function, an optional CPU fan
above the operating system can be set to
turn on when the CPU reaches the set
temperature.
Information:
This function is not supported by MS-
DOS.
Disabled Disables this function.
40 °C .. 100 °C Temperature setting for the active trip point. Can
be set in 5 degree increments.
Table 209: 855GME - ACPI control - setting options
BIOS setting Description Setting options Effect
Table 208: 855GME - power - setting options (cont.)