B&R Industries Automation PC 620, User Manual

Page: 35 / 512

Technical data • Introduction
Chapter 2
•
Te
chn
ica
l da
ta
35 Automation PC 620 User's Manual V 1.90
1.2.1 Selection guide - basic system
Explanation:
1) Select one system unit.
2) System selection - choose one CPU board variant (815E or 855GME).
3) Select one each of main memory and heat sink, based on selected CPU board.
4) Select optional components, based on selected system unit (see Section 1.2.2 "Selection
guide - optional components" on page 36).
Figure 2: Configuration - basic system
5PC600.SX01-00 (1 / 0 / 0) 5PC600.SX02-01 (2 / 1 / 0)
5PC600.SX02-00 (2 / 1 / 1) 5PC600.SX05-01 (5 / 2 / 0)
5PC600.SX05-00 (5 / 2 / 1)
5PC600.E855-00 - PM 1100 MHz
5PC600.E855-01 - PM 1600 MHz
5PC600.E855-02 - PM 1400 MHz
5PC600.E855-03 - PM 1800 MHz
5PC600.E855-04 - CM 600 MHz
5PC600.E855-05 - CM 1000 MHz
5MMDDR.0256-00 - 256 MB
5MMDDR.0512-00 - 512 MB
5MMDDR.1024-00 - 1 GB
5AC600.HS01-00
5AC600.HS01-01
5AC600.HS01-02
System unit
A system unit consists of
housing and baseboard.
PCI slots (1,2 or 5)
Slide-in slots (0,1 or 2)
AP Link slot (0 or 1)
Variants:
Configuration - basic system
5PC600.E815-00 - C3-400 MHz
5PC600.E815-02 - C3 733 MHz
5PC600.E815-03 - C3 1000 MHz
5MMSDR.0128-01 - 128 MB
5MMSDR.0256-01 - 256 MB
5MMSDR.0512-01 - 512 MB
CPU board - Main memory - Heat sink: select 1 of each component
Example: 2 / 1 / 1
= 2 PCI, 1 slide-in, 1 AP Link
Select 1
815E CPU board
855GME CPU board
Main memory
Heat sink
1)
1) With 855GME CPU boards 5PC600.E855-01 and 5PC600.E855-03 this must be used.
System selection