B&R Industries Automation PC 620, User Manual

Page: 356 / 512

356
Maintenance / servicing • Overview of standards
Automation PC 620 User's Manual V 1.90
EN 60529 Degrees of protection provided by enclosures (IP code)
EN 60664-1 Insulation coordination for equipment within low-voltage systems - part 1: Principles, requirements and
tests
EN 60721-3-2 Classification of environmental conditions - part 3: Classification of groups of environmental
parameters and their severities, section 2: Transportation
EN 60721-3-3 Classification of environmental conditions - part 3: Classification of groups of environmental
parameters and their severities, section 3: Stationary use at weather-protected locations
EN 61000-4-2 Electromagnetic compatibility (EMC) - part 4-2: Testing and measuring techniques; electrostatic
discharge immunity test
EN 61000-4-3 Electromagnetic compatibility (EMC) - part 4-3: Testing and measuring techniques; radiated radio-
frequency electromagnetic field immunity test
EN 61000-4-4 Electromagnetic compatibility (EMC) - part 4-4: Testing and measuring techniques; electrical fast
transient/burst immunity test
EN 61000-4-5 Electromagnetic compatibility (EMC) - part 4-5: Testing and measuring techniques; surge immunity
test
EN 61000-4-6 Electromagnetic compatibility (EMC) - part 4-6: Testing and measuring techniques; immunity to
conducted disturbances, induced by radio-frequency fields
EN 61000-4-8 Electromagnetic compatibility (EMC) - part 4-8: Testing and measuring techniques; power frequency
magnetic field immunity test
EN 61000-4-11 Electromagnetic compatibility (EMC) - part 4-11: Testing and measuring techniques; voltage dips,
short interruptions and voltage variations immunity tests
EN 61000-4-12 Electromagnetic compatibility (EMC) - part 4-12: Testing and measuring techniques; oscillatory waves
immunity test
EN 61000-4-17 Electromagnetic compatibility (EMC) - part 4-12: Testing and measuring techniques; ripple on DC input
power port immunity test
EN 61000-4-29 Electromagnetic compatibility (EMC) - part 4-29: Testing and measuring techniques; voltage dips,
short interruptions and voltage variations on DC input power port immunity tests
EN 61000-6-2
(EN 50082-2) Electromagnetic compatibility (EMC), generic immunity standard - part 2: industrial environments (EN
50082-2 has been replaced by EN 61000-6-2)
EN 61000-6-4
(EN 50081-2) Electromagnetic compatibility (EMC), generic emission standard - part 2: industrial environments (EN
50081-2 has been replaced by EN 61000-6-4)
EN 61131-2
IEC 61131-2 Product standard, programmable logic controllers - part 2: equipment requirements and tests
UL 508 Industrial control equipment (UL = Underwriters Laboratories)
VDE 0701-1 Service, modification, and testing of electrical devices - part 1: General requirements
47 CFR Federal Communications Commission (FCC), 47 CFR Part 15 Subpart B Class A
Standard Description
Table 247: Overview of standards (cont.)