Live Preview Introduction
DVR User Manual
31
Add Scheme
Click
in area
①
to create a new scheme. Click
on the top right corner of the
scheme to delete it.
Configure Scheme
a)
Select a scheme in area
①
and then click the screen mode button on the tool bar to set the
screen mode of the scheme.
b)
Select a camera window in area
②
and then double click the camera or group in area
③
.
The camera or group will be added into the selected window. One camera in the same scheme
cannot repeat. You can click the right-click menu
“
Clear
”
in area
②
to remove a single camera
or click
to remove all the cameras.
c)
Click
“
Apply
”
to save the settings.
Start Sequence View
Go to live preview interface and then click
to pop up a window. Set the dwell time in the
window and then click
to start scheme view in sequence. Double click the sequence view
interface to pause the view; double click again to restore the view. Click
to stop the view.
5.2.4 Spot View
Click Start
Settings
System
Basic
Output Settings
Output 2 to go to the interface as
shown below.
Click
on the left to create a new scheme. Each scheme can only add one analog camera.
Select a scheme on the left and then double click or drag a camera on the right to the scheme
window in the middle of the interface. After finishing the settings of all the schemes, select the
dwell time and click
“
Apply
”
to start playing the schemes in sequence in output 2.
Summary of Contents for AVK-TL91E4-1T
Page 57: ...Record Disk Management DVR User Manual 51 ...
Page 102: ...FAQ DVR User Manual 96 Fig 9 2 ...
Page 105: ...A1 ...
