AVYCON AVK-TL91E4-1T User Manual Download Page 77

Page: 77 / 105

Account & Permission Management

DVR User Manual

10.3.2 Edit Permission Group

Go to

“

Edit Permission Group

”

interface and then click

in the group list to edit the

permission group (the operations of the

“

Edit Permission Group

”

are similar to that of the

“

Add

Permission Group

”

, please see 10.3.1 Add Permission Group for details). Click

to save

the group as another group. Click

to delete the permission group. The three default

permission groups (

“

Administrator

”

“

Advanced

”

and

“

Common

”

) cannot be deleted.

10.4 Black and White List

①

Click Start



Settings



Account and Authority



Security to go to the following interface.

②

Check “Enable”

and then c

hoose “Enable Allow List” or “Enable Block List” (

the PC

client of which the IP address is in the allow list can access DVR remotely while the PC client
in the block list cannot).

③

Add IP/IP segment/MAC.

Click “Add

”

“

Add MAC

”

button and then check

“

Enable

”

in the popup window (only if you check it can the IP/IP segment/MAC you add be effective).

Enter the IP/IP segment/MAC and then click

“

”

button. In the above interface, click

to edit IP/IP segment/MAC, click

to delete it. Click

“

Apply

”

to save the settings.

10.5 View Online User

Click Start



Settings



Account and Authority



User Status to view the online user

information (you can view the online user name, login type, IP address and login time; click

to pop up a window showing the preview occupied channel number and playback occupied

channel number).

Summary of Contents for AVK-TL91E4-1T










































































































Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands

AVYCON AVK-TL91E4-1T, User Manual

Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands