AVYCON AVK-TL91E4-1T User Manual Download Page 54

Page: 54 / 105

Record & Disk Management

DVR User Manual

Click

“

All

”

to set all week recording; click

“

Reverse

”

to swap the selected and unselected time

in a week; click

“

Clear All

”

to clear all the selected area in a week.

7.3.2 Record Schedule Configuration

Click Start



Settings



Record



Record Schedule



Schedule Configuration to go to the

interface as shown below. Set the schedule of sensor record, motion record and timed record.
Click

“

None

”

in the drop-down menu to clear the schedule. Click

“

Apply

”

to save the settings.

Go to

“

Edit Schedules

”

interface and then click

to edit the schedule. The settings of

“

Edit

Schedule

”

are similar to that of the

“

Add Schedule

”

. Click

to delete the schedule.

7.4 Record Mode

7.4.1 Manual Recording

Method One

: Click

on the tool bar at the bottom of the live preview interface to enable

recording of the camera.

Method Two

: Go to live preview interface and then click the right-click menu

“

Manually

Record On

”

in the camera window or click

on the tool bar under the camera window to

start recording.

Note: Click Start



Settings



Record



Mode Settings and then set the manual record time in the

interface. Click

“

Apply

”

to save the settings.

Summary of Contents for AVK-TL91E4-1T










































































































Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands

AVYCON AVK-TL91E4-1T, User Manual

Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands