AVYCON AVK-TL91E4-1T User Manual Download Page 88

Page: 88 / 105

Device Management

DVR User Manual

Insert the USB storage device into the USB interface of the DVR and then click
Start



Settings



System



Maintenance



Backup and Restore to go to the interface.



Backup

Select the USB device in

“

Device Name

”

option; go to the path where you want to store the

configuration backup file and then click

“

Backup

”

button; finally click

“

”

button in the

popup window.



Recover

Select the USB device in

“

Device Name

”

option; find the configuration backup file and then

click

“

Recover

”

button; finally click

“

”

button in the popup window.

11.6 Restart Automatically

You can set the automatic restart time for the DVR to maintain it regularly. Click
Start



Settings



System



Maintenance



Auto Maintenance to go to the interface as shown

below. Enable auto maintenance, set the interval days and point of time and then click

“

Apply

”

to save the settings. The DVR will restart automatically at the pointed time every interval days.

11.7 View Log

Click Start



Settings



System



Maintenance



View Log to go to the log view interface.

Select the log main type, click

to set start time and end time and then click

“

”

button. The searched log files will be displayed in the list.

Summary of Contents for AVK-TL91E4-1T










































































































Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands

AVYCON AVK-TL91E4-1T, User Manual

Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands