AVYCON AVK-TL91E4-1T User Manual Download Page 97

Page: 97 / 105

Remote Surveillance

DVR User Manual

Button

Meaning

Backup tasks button. Click it to view the backup status.

Event list button. Click it to view the event record of manual/schedule/sensor/motion.

12.4.3 Remote Backup

Click

“

Backup

”

in the remote interface to go to the backup interface. You can back up the

record by event or by time.



By Event

Check the record type on the left side of the interface and then click

to set the start time

and end time; check the cameras and then click

on the right side to search the record (the

searched record data will be displayed in the list); check the record data in the list and then
click

“

Backup

”

button to backup the record.



By Time

Click

to set the start time and end time on the left side of the interface; check the cameras

and then click

on the right side to backup the record.

View Backup Status

: Click

“

Backup Status

”

to view the backup status. Click

“

Pause

”

to pause

the backup; click

“

Resume

”

to continue the backup; click

“

Delete

”

to delete the task.

12.4.4 Remote Configuration

Click

“

Function Panel

”

in the remote interface and then configure the camera, record, alarm,

disk, network, account and authority and system of the DVR remotely. All of these settings are
similar to that of the DVR. See the configurations of the DVR for details.

Summary of Contents for AVK-TL91E4-1T










































































































Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands

AVYCON AVK-TL91E4-1T, User Manual

Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands