AVYCON AVK-TL91E4-1T User Manual Download Page 46

Page: 46 / 105

PTZ

DVR User Manual

Click

to start the cruise and click

to stop the cruise in the cruise list of the cruise

operation tab; click

“

Delete

”

button to delete the selected cruise.

You can also go to cruise setting interface for cruise setting, see 6.3 Cruise Setting for details.

6.2 Preset Setting

Click Start



Settings



Camera



PTZ



Preset to go to the interface as shown below.



Add preset

Select camera and then click “Add”

button to add preset; or click

in the camera list on

the right side of the interface to display the preset information of the dome and then click

to add preset. The operations of the

“

Add Preset

”

window are similar to that of the

PTZ control interface; please see 6.1 PTZ Control Interface Introduction for details.



Edit preset

Select camera and preset. You can input the new name of the preset and then click

save the new preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset
and then click

“

Save Position

”

to save the preset.



Delete Preset

Select camera and preset and then click

“

Delete

”

to delete the preset.

Summary of Contents for AVK-TL91E4-1T










































































































Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands

AVYCON AVK-TL91E4-1T, User Manual

Search results

Summary of Contents for AVK-TL91E4-1T

Reviews:

Related manuals for AVK-TL91E4-1T

Brands by name

Popular brands