Camera Management
DVR User Manual
23
4
Camera Management
4.1 Camera Signal
Click Start
Settings
Camera
Manage Camera
Camera Signal to go to the interface as
shown below.
The DVR device supports hybrid access of TVI, AHD and CVI high definition cameras. If the
TVI high definition camera is accessed to the DVR, you should select TVI in the following
interface to show the camera image normally; if you select AHD, then there will be no image
or the image has no color. The default selection of the camera signal is Auto. If you select Auto,
the image of the camera will be shown normally regardless of the camera type.
You can enable
“
Lite
”
in the interface if the DVR supports
“
Lite
”
recording. It will lower the
recording resolution and increase the recording frame rate. Please enable or disable the Lite as
you wish.
4.2 Add/Edit Camera
4.2.1 Add Camera
The network of the DVR should be set before adding IP camera (see 11.1.1 TCP/IP
Configuration for details).
Summary of Contents for AVK-TL91E4-1T
Page 57: ...Record Disk Management DVR User Manual 51 ...
Page 102: ...FAQ DVR User Manual 96 Fig 9 2 ...
Page 105: ...A1 ...
