I n s t a l l i n g a n d U s i n g t h e A v i d E x p a n s i o n C h a s s i s
C h a p t e r 4 • 3 D E f f e c t s I n s t a l l a t i o n
6 5
15. Do one of the following steps:
a. If the application software runs correctly, the installation is complete.
b. If the application software does not run correctly, fix any problems using
“3D Effects Option Problems,” in Chapter 6. Then, repeat all the steps in
“Testing the 3D Effects Installation” on page 62 to ensure that the chassis is
completely functional.
Reinstalling the Card Guide Assembly
The card guide assembly has six 4-inch guides and six 6-inch guides. You may need
to adjust the card guides to fit the NuBus cards before you reinstall the assembly.
To adjust the card guides:
1. Adjust the card guides to match the height of the NuBus cards in the various
slots (see Figure 48).
2. Remove the guides from the mounting plate by squeezing the nylon holding
pins together with needle-nose pliers and pushing them through the plate.
Figure 48: Card Guide Assembly
6-inch guide
4-inch guide
Summary of Contents for EXPANSION CHASSIS
