![background image](http://html1.mh-extra.com/html/avid-technology/expansion-chassis/expansion-chassis_instructions-for-installing-and-using_3031240068.webp)
5 6
C h a p t e r 4 • 3 D E f f e c t s I n s t a l l a t i o n
I n s t a l l i n g a n d U s i n g t h e A v i d E x p a n s i o n C h a s s i s
2. Cut the wire-ties holding the Python connector in place.
Figure 40: Connecting the Power Harness
3. Loosen the power supply by removing the three screws that hold it in place. The
screws are on the bottom of the chassis.
4. Roll the power supply out over the NuBus board.
5. Loosen the screws on connectors 1, 2, 3, 4, and 6 by one turn (see Figure 41).
6. Slide the spade lugs for the Python power connector off the power supply.
Make sure that all the other wires attached to each power supply connectors
remain in place.
7. Remove the Python connector from the chassis.
Power harness
Fan assembly
Power supply
Python connector
NuBus board
Card guide bracket
Summary of Contents for EXPANSION CHASSIS
