5 4
C h a p t e r 4 • 3 D E f f e c t s I n s t a l l a t i o n
I n s t a l l i n g a n d U s i n g t h e A v i d E x p a n s i o n C h a s s i s
Attaching the 3D Effects Cover
The 3D Effects cover attaches to the back of the Expansion Chassis with a piano-
style hinge.
✍
The 3D Effect cover is heavy and cumbersome to install by yourself. You may need to
have help while you perform the first three steps in this section.
To attach the cover:
1. Fold the hinge out away from the cover.
2. Place the hinge over the screw holes at the back of the chassis (see Figure 39).
3. Insert two of the hinge screws. Align the front edge of the hinge with the front
edge of the rear flange and then tighten the screws.
4. Unlatch and fold down the cover support rod from the left of the cover. Let the
cover fall back onto the support rod.
5. Place the support rod in the slot on the left side of the chassis.
6. Insert and tighten the remaining screws.
Figure 39: Attaching the 3D Effects Cover
3D Effects
3D cover
Hinge
Shielding
boards
Support rod slot
Support rod
Summary of Contents for EXPANSION CHASSIS
