background image

Owner’s Manual

Assembly Guide

miniStack v2

External Storage Enclosure for

3.5” Hard Drive

Includes built in FireWire / USB Hub

® Copyright 2006 by Newer Technology, Inc. All Rights Reserved

The information contained within is believed to be accurate and reliable. New-

er Technology, Inc. assumes no responsibility for any errors contained within. 

Newer Technology, Inc. Reserves the right to make changes in the specifica-

tions and/or design of this product without prior notice. The photographs 

contained within may differ from the product that you receive and are there 

for illustration purposes only. Newer Technology, Inc. Assumes no responsibil-

ity for any differences between the product mentioned in this manual and the 

product you may receive.

Revision 3 February 16, 2006 JD

NWTFWU2MSV2

Summary of Contents for miniStack v2

Page 1: ...o responsibility for any errors contained within Newer Technology Inc Reserves the right to make changes in the specifica tions and or design of this product without prior notice The photographs contained within may differ from the product that you receive and are there for illustration purposes only Newer Technology Inc Assumes no responsibil ity for any differences between the product mentioned ...

Page 2: ...uilt in USB 2 0 and FireWire 400 1394A hubs allowing you to expand your peripherals without adding external hubs which clutter up your desk Internal Storage The Newer Technology miniStack v2 has a built in ATA connector which supports large drive technology offering massive storage capacity Simply place your own ATA hard drive inside the miniStack v2 enclosure and connect using either FireWire 400...

Page 3: ...our miniStack v2 enclosure underneath your Mac mini Do not place anything behind your miniStack that would block airflow Treat your miniStack v2 just like you treat your Mac mini keep it dry cool and out of direct sunlight Always check any peripheral cable that you are going to use with your miniStack enclosure for damage before hooking them up Hard Disk Mode On the back of the miniStack v2 you wi...

Page 4: ...isiting the drive manufacturer s website Place the ATA drive onto the mounting bracket as shown The connecting cables need to be positioned to the left with the opening in the drive bracket to the top Once inserted properly into the bracket insert the 4 included screws to fasten it securely 3 Place the drive and bracket inside the Newer Technology miniStack v2 enclosure routing the power and ATA c...

Reviews: