Avid Technology EXPANSION CHASSIS, Instructions For Installing And Using, Page: 64 / 98

5 2 C h a p t e r 4 • 3 D E f f e c t s I n s t a l l a t i o n I n s t a l l i n g a n d U s i n g t h e A v i d E x p a n s i o n C h a s s i s
3. Remove the four screws that hold the card guide assembly in place. Lift the
assembly up and out of the chassis (see Figure 36).
Figure 36: Card Guide Assembly Removal
4. Locate the PCB clamp at the rear of the chassis interior (see Figure 37).
Figure 37: PCB Clamp
5. Remove the three screws that hold the PCB clamp in place.
6. Lift the PCB clamp upward to remove it from the chassis.
PCB clamp