Avid Technology EXPANSION CHASSIS, Instructions For Installing And Using, Page: 27 / 98

I n s t a l l i n g a n d U s i n g t h e A v i d E x p a n s i o n C h a s s i s C h a p t e r 2 • P o p u l a t e d C h a s s i s I n s t a l l a t i o n 1 5
3. Attach the other end of the cable to the SCSI connector on the back of the
Macintosh. Tighten the thumb screws to secure the connector.
▲
The 3D Effects cover is a self-terminating SCSI device. It requires no external
SCSI terminator. If you have other devices on the Macintosh SCSI bus, make
sure that the 3D Effects cover is the last device in the SCSI chain.
4. Set the SCSI ID using the SCSI ID switch (see Figure 9). The ID number
appears in the window in the middle of the switch. Press the top button to
decrement the SCSI ID. Press the bottom button to increment the SCSI ID.
Figure 9: 3D Effect SCSI ID Switch
2
-
+
Decrement ID
Increment ID
Current SCSI ID