72
4.1 F
UNCTION
MENU
4.1 F
UNCTION
MENU
ALS
20X
256
Sensor Test
function:
– See “Sensor test” on page 178.
Memory card test
function:
– Test function for compact flash cards
– Pressing the Online key starts a test routine for the
compact flash card memory. After a successful test,
the following is displayed:
If the compact flash card is faulty or not in place, an
appropriate error message is displayed.
Test functions
function:
– Starts motor durability test: Both motors start and
stop continually at short intervals
– For use at the factory
Store diagnosis
function:
– Stores the diagnostic data on CF card.
– The default file name composes as follows:
„Diagnose ALS 306 RH A637804070501067.log“
ALS 306 RH = device type
A637804070501067 = Serial number of the CPU
board; equals the value displayed under
SERVICE
DATA >CPU BOARD DATA > Serial number
Data blocks del.
function:
– Deletes one or all data blocks in the flash memory.
– Appears only, if at least one data block is in the flash
memory.
– Settings: [
Bxx
, All]
Bxx: Deletes block number xx.
After calling the parameter, data block number 01 is
displayed:
„B01“: block number 01.
„diagnose inf“: name of the data block; is contained
in the data block header.
If the flash memory contains more than one data
block:
Press the cut button several times, until the wanted
data block appears.
Deleting a data block:
Press the online button.
Press the feed button to change to „yes“.
Press the online button to delete the block.
All: Deletes all blocks
PS registers
function:
– By means of this parameter, the register contents of
the power supply can be changed
– Appears only in production mode
– Parameter only for authorised, trained service per-
sonnel
Memory card test
Card Test O.K.
Data blocks del.
B01 diagnose inf
Data blocks del.
Delete? --> no
Summary of Contents for ALS 204
Page 1: ...ALS 204 206 256 SERVICE INSTALLATION MANUAL Labeller Edition 8 3 2012 Original version ...
Page 2: ......
Page 223: ......