Avery Dennison ALS 204, Service And Installation Manual

Page: 123 / 224

123
7 E
LECTRONICS
D
ESCRIPTION
7.3 C
IRCUIT BOARDS
ALS
20X
256
A JP 901: Jumper controls pin 2 of the alternative label
sensor
– Preset: Jumper open
– Siehe “Changing light/dark switching at the product
sensor or the alternativ label sensor” auf Seite 51.
B CN 906: Connection for alternative label sensor
C JP 902: Jumper controls pin 2 of the product/start
sensor
– Preset: Jumper open
– Siehe “Changing light/dark switching at the product
sensor or the alternativ label sensor” auf Seite 51.
D CN 905: Connection for product/start sensor
E CN 904: Connection for (Wenglor) photoelectric la-
bel sensor
F CN 903: Sensor connection for external roll diame-
ter control
G CN 902: Connection for rotary encoder, for auto-
matic speed adjustment
H CN 502: Supply voltage connection for applicator
interface (+24 V)
I CN 501: Power supply unit connection
– Power supply for the board with 5 V and 24 V
J CN 702: Connection to applicator interface
K JP 601: Jumper micromonitor (Diagnostic software
for factory-internal use)
– Preset: open
L JP 602: Jumper with no function
M CN 802: Connection for additional motor driver
(optional)
N CN 808: Sensor connection for internal roll diameter
control
O CN 809: Connection for pressure roller switch
(optional)
P CN 703: Connection for power supply (I
2
C bus)
Q CN 801: Motor driver connection
R CN 807: Connection for dancer arm sensor 1
(optional)
S CN 806: Connection for dancer arm sensor 2
(optional)
T CN 805: Connection for dancer arm sensor 3
(rewind unit)
U CN 704: Connection for RFID read-write control
(optional)
V CN 101: Debug interface
W CN 401: Ethernet connection 10/100 Base T
X D 401: Operation display for the Ethernet connec-
tion:
Y CN 701: RS 232 connection
Z CN 601: RS 485 operator panel connection
AA CN 701: External operator panel connection
AB CN 601: Slot for compact flash card
AC CN 102: USB interface (device)
AD CN 103: USB interface for optional internal use
AE D 506: Green display to indicate 5 V supply
AF CN 901: PLC signal interface
– For activating simple applicators
AG D 507: Yellow display to indicate 24 V supply
AH CN 907: Connection for the M12 socket for signal
inputs
AI CN 908: Connection for the M12 socket for signal
outputs
LED Meaning
Green – Continuously lit : High transfer rate
(100 Mbit/s)
Yellow – Continuously lit : Labeller is con-
nected with the network
– Flashing : Communicating with net-
work