96
6.2 L
OADING
F
IRMWARE
ALS
20X
256
Serial interface
On the host computer:
Open a command prompt window.
Enter:
(see [101])
– Replace “ALS.BF_V1.33.s3b” with the name of the
current firmware file.
Press the Enter key.
[101] Command prompt window showing the command to transfer
the file “ALS.BF_V1.33.s3b” to the interface Com1.
USB/Ethernet interfaces
On the host computer:
Open a command prompt window.
Enter:
– Replace “ALS.BF_V1.33.s3b” with the name of the
current firmware file.
Please note:
– ComputerName = Name of the computer. You can
find this name in Windows XP under START > SET-
TINGS > CONTROL PANEL > SYSTEM > COM-
PUTERNAME (e.g. “DM-ECH-0990”).
– Share name = name found in Windows XP under
START > SETTINGS > PRINTERS AND FAXES, by
right-clicking on the device icon then clicking PROP-
ERTIES > SHARING. The Share name stands for a
printer that is connected to a certain port – a USB
port for transfer via USB or the TCP/IP port for
Ethernet transfer.
Some tips about transfer via a USB or Ethernet
interface:
– The procedure described does not work with
Windows 98, Windows ME or
Windows NT 4.0.
– The Share name must satisfy MS-DOS con-
ventions (max. 8 characters length, no spe-
cial characters or spaces)
The download process
The firmware download starts without any further as-
sistance, accompanied by the display:
(xxx: KBytes loaded)
this message is periodically briefly interrupted by the
display:
(xx: address of the sector being deleted at that mo-
ment)
Once the firmware has been successfully loaded, the
machine is restarted.
copy ALS.BF_V1.33.
s
3
b
com1 /
b
copy ALS.BF_V1.33.
s
3
b
\\Compute
r
name\
Sha
r
ename
RISC update
KBytes: xxx
RISC update
Delete Sect: xx
Summary of Contents for ALS 204
Page 1: ...ALS 204 206 256 SERVICE INSTALLATION MANUAL Labeller Edition 8 3 2012 Original version ...
Page 2: ......
Page 223: ......