Avery Dennison ALS 204, Service And Installation Manual

Page: 109 / 224

109
6 E
NHANCED
F
UNCTIONS
6.4 I
NTERFACE COMMANDS
ALS
20X
256
The #!PC command
Syntax:
#!PC<Function ID>/<Value>
Immediate command for setting of function values. In
comparison to the #PC command, only the functions
listed afterwards can be set this way. The settings take
effect immediately.
[110] Functions which are setable with the #!PC function.
1) Maxint = 4294967296
The #!SP command
Syntax:
#!SP
– In dispensing mode, the following is displayed after
sending the command:
– Continuing the dispensing: press the button or
send #!SR.
<Function ID> <Value> Function Function in menu
2005 n = 0 - Maxint
1)
Label counter MACHINE SETUP > Dispense counter
2065 n = 0 - 16 Loads product profile no. „n“. A va-
lid product profile must be stored
under this number. After the com-
mand, a restart is executed. LABEL SETUP > Load prod.profil
3213 n = 0 - 10000 ms Signal delay after dispense end SIGNAL INTERFACE >PLC SIGNALS>
Disp.end delay
6000 f = 0.0 - MAX m/min Dispensing speed LABEL SETUP > Dispense speed
6001 f = 0.0 - MAX m/min Slew speed LABEL SETUP > Slew speed
6002 f = 5.0 - 500.0 mm Material length LABEL SETUP > Label pitch
6003 f = 0.0 - 999.9 mm Label stop position LABEL SETUP > Lab. stop offset
6004 f = 15.0 - 9999.9 mm Start offset LABEL SETUP > Start offset
6010 n = 0 - 100 % Adjustment label sensor MACHINE SETUP > Sensor Adjust
6016 n = 0 - Maxint
1)
Label amount LABEL SETUP > Label stop quan.
6017 f = 0.0 - 1999.9 mm Product length LABEL SETUP > Product length
ONLINE
Gestoppt: xxx