avertX NV160 Series, User Manual

Page: 4 / 96

4
HANDLING
Please retain the original shipping carton and/or packing materials supplied
with this product. To ensure the integrity of this product when shipping or
moving, repackage the unit as it was originally received from the
manufacturer.
Do not use volatile liquids, such as aerosol spray, near this product. Do not
leave rubber or plastic objects in contact with this product for extended
periods of time. Rubber or plastic objects left in contact with this product for
extended periods of time will leave marks on the finish.
The top and rear panels of the unit may become warm after long periods of
use. This is not a malfunction.
LOCATING
Place this unit on a level surface. Do not use it on a shaky or unstable
surface such as a wobbling table or inclined stand.
If this unit is placed next to a TV, radio, or VCR, the playback picture may
become poor and the sound may be distorted. If this happens, place the
recorder away from the TV, radio, or VCR.
CLEANING
Use a soft dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent solution, wring well and
wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as
thinner and benzene, as they may damage the surface of the recorder.
If using a chemical saturated cloth to clean the unit, follow that product’s
instructions.
MAINTENANCE
This recorder is designed to last for long periods of time. To keep the
recorder always operational we recommend regular inspection maintenance
(cleaning parts or replacement). For details, contact the nearest dealer.
MOISTURE CONDENSATION
Moisture condensation damages the recorder. Read the following
information carefully.
Moisture condensation occurs during the following cases:
 When this product is brought directly from a cool location to a warm
location.
 When this product is moved to a hot and humid location from a cool
location.
 When this product is moved to a cool and humid location from a
warm location.
 When this product is used in a room where the temperature
fluctuates.
 When this product is used near an air-conditioning unit vent
 When this product is used in a humid location.
Do not use the recorder when moisture condensation may occur.
If the recorder is used in such a situation, it may damage discs and internal
parts. Remove any CD discs, connect the power cord of the recorder to the
wall outlet, turn on the recorder, and leave it for two to three hours. After two
to three hours, the recorder will warm up and evaporate any moisture. Keep
the recorder connected to the wall and moisture will seldom occur.
WARNING
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE
ENCLOSURE.
DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.