avertX NV160 Series, User Manual

Page: 95 / 96

33672AB
95
The PnP feature is designed to work exclusively with AvertX cameras.
You can use ONVIF compliant cameras from other manufacturers, but
you must disable PnP and configure your cameras manually.
1. Plug the camera into an available channel on the back of the
recorder.
2. On the camera, using the manual that came with the camera,
assign the camera a new IP address and set the gateway and
subnet to match the information in the table below.
Settings PS AvertX NVR
IP Address 192.168.53.xxx
Gateway 192.168.53.1
Subnet 255.255.255.0
Note
Be sure that the last two digits of the IP address for each
camera is unique, so there are no duplicates in your camera
network.
3. On the hover menu, click Setup .
4. Click Cameras Setup .
5. Select the appropriate camera channel.
6. Select
Enable PnP and click Off .
7. Ensure that Activated is set to Off .
8. Click Device Search .
9. Once the PRO Series unit has located your devices, the brand,
model, and IP address of each camera on your system will appear.
10. Click the camera you want to assign to this channel.
Note You can also manually enter the IP address of the camera.
To do so, click Hostname/IP and type the IP Address of your
camera.
11. Click Model and select ONVIF .
12. Click Connection Setup .
13. Click Account and type in the username for the camera (the
default user name can be found in the user manual for the camera).
14. Click Password and type the password for the camera (this
information is also found the camera’s user manual).
15. Click Main Stream Setup and make sure the Management Port
and Streaming Port (RTSP port) match port settings on your
camera (this information is also found the camera’s user manual).
16. When you have finished configuring your camera, click
Activated
and select Yes .
Note For more information on other camera configuration settings
in this menu, refer to Connection Setup in the Cameras
chapter of the PRO Series User Manual.
When you are finished configuring your cameras and return to the Live
screen, it may take a few moments for video to appear.