AUX AMCA-H09/4R1A, Service Manual

Page: 87 / 142

AUX DC Inverter Free Match 50HZ R410A Installation
87
8. Installation
8.1 Preparation and equipments before installation
1 Please buy following spare parts from your local market before installation
2 Hung bolts M12, 4 pcs
3 Drainage pipe PVC
4 Copper connecting pipe
5 Adhesive belt (big size) 5 pcs, (small size) 5 pcs
6 Heat insulation material used to connect copper pipe (PE foam material, its thickness is more than 8mm)
7
Power cable, electrical wire between indoor and outdoor unit(Must be in accordance with the wire diameter
in the wiring diagram)
8 Acetylene cylinders, oxygen cylinders (when longer pipe used it should be welded)
9 One set pipe cut machine. (cut copper pipe)
10 Refrigerant cans, electronic balance (when longer pipe used additional gas should be charged)
11 Pressure gauges, pipe clamp, welding torch, 2B silver electrode
12 Wrench 2 pcs, one of them is with adjustable torque wrench(42N.m,65N.m,100N.mm)
13 Nitrogen cylinder (in order to prevent oxidation when welding, using Nitrogen to replace the air)
Select installation position of outdoor unit
◇
The site shall be strong enough to bear its weight, prevent noise and vibration.
◇
The site shall be ensured to avoid direct sunshine, if necessary set a Havelock above the outdoor unit.
◇
The site shall be easy to drainage the rain water and the frost water.
◇
The site shall be ensured that the outdoor unit will not be covered by snow LDring the winter season.
◇
The site shall be ensured that the outlet is not facing the strong wind.
◇
The site shall be ensured that outlet air and
operation noise will not affect the neighbors’ daily life.
◇
The site shall be ensured that the outdoor unit will not be affected by the garbage and oil mist.
Warning :
If outdoor unit working under such environment which contains oil (including machine oil) salt(marine areas), sulfide
gas (hot springs and oil refinery areas), those substance may lead to the failure work of the outdoor unit.
Maintenance and ventilation space
◇
The site shall be easy for ventilation then the outdoor unit can inhale and dischar
ge air easily. What’s more please
reserve enough space for maintenance.
Note: Require A
＞
300mm; B
＞
1500mm; C
＞
300mm; D
＞
500mm;
Outdoor unit installation
◇
Use size M10 bolt and nut to fasten the outdoor unit tightly on the bracket, keep it in the horizontal level. The
suitable length for bolt shall 20mm over the base level, in order to minimize vibration please do set a rubber shock
absorber.
◇
If the outdoor unit is mounted on the wall or on the rooftop, in order to prevent earthquake and strong wind please
fasten it as tightly as possible.
◇
Set a drainage channel to ensure the condensing water can drain out smoothly.