AUX AMCA-H09/4R1A, Service Manual

Page: 126 / 142

AUX DC Inverter 1 Drive1 50HZ R410A Sensorresistance table
126
5.
“HEAT”button
*Pressthe HEAT button,youcandirectlyentercooling mode.
Note: cooling onlyunit hasno heatingfunction.
6.
“SWING”button (SWING←→ andSWING↑↓)
*Pressthis buttonto startup/down(left/right) swingfunction, press itagain,fixlouver position.
*Up/down(left/right)settingisonlyvalidinthismode;itwill not affectlouver positioninothermodes.
*Up/down (left/right)swing hasmemoryfunction, itcan keepprimarysettingwhen turn offthenturnon
orswitchfromothermodesto primarymode.
7. “HEALTH” button
* Press this button; you can turn on or off the health function.
8. “SLEEP” button
* Press SLEEP button, the sleeping indicator light of indoor unit flashes on.
* The air-conditioner runs in sleeping mode for 10 hours and quiet sleep mode, recover back to former
mode.
* The unit will turn off automatically if the timing mode is running out of time.
* Note: press the MODE or ON/OFF button, the remote controller clears sleeping mode away.
9. “iFEEL” button
* Press this button to set “iFEEL”function. The LCD shows the actual room temperature when the
function set and it shows the setting temperature when the function cancelled.
* This function is invalid at Fan mode.
10.“DISPLAY” button
* In display mode, press button once, switch off “DISPLAY”, Press “DISPLAY” again, LCD will show
ambient & setting temperature after flashing 5s. It's convenient for users to check ambient or setting
temperature at any time in darkness.
11.“iCLEAN” button
* When remote controller is at the off state, press this
button, the unit runs“iCLEAN”function .
* The purpose of this function is to clean dust on evaporator and dry the inside water of evaporator and
to prevent theevaporator going moldy due to water deposition and boasting strange smell.
* After setting “iCLEAN” function, press“iCLEAN”buttonor“ON/OFF”button to quit.
* The clean function will stop working after about 30 minutes running without any operation.
12.
“ELE.H”button(forauxiliaryelectricheatingIDU)
*In heatingmode,pressthisbutton, auxiliary electric heatingwillwork.
13
.“Anti-FUNGUS”button
* The purpose ofthisfunctionisto drytheinsideofthe evaporatorandtopreventthe
evaporatorfrom going mouldyduetowater deposition andthus dispersing strangesmell.
* To operatethefunction:under
“off” status oftheA/Cand
Theremotecontroller,press
“
Anti-UNGUS
”button for
Onetime,thebuzzer keepbeepingfivetimesagain after five timesbeep, indicatingthatthe
functionisready.
* To cancel the function:1.unde
r“OFF”statusof theA/Cand
theremotecontroller,press
“
Anti-FUNGUS
”buttonagain.
14
.“SPOTSWING”button
*Pressthisbutton,thehorizontalwind directionvanescanswingautomatically,whenyou have the desired
vertical wind direction.
*Press
“
SPOT SWING
”again,thehorizontal winddirectionvaneswill bestoppeddependonyou.
15
.“ECO”button
*In coolingmode, pressthisbutton,theunitwillrun“
ECO
” economic operationmodewhichtakestheleast
power consumption.
*Afterrunning for 8h,itwill automatically quit.Youcan press
“
ECO
”buttononceagaintoquit.