AUX AMCA-H09/4R1A, Service Manual

Page: 128 / 142

AUX DC Inverter 1 Drive1 50HZ R410A Sensorresistance table
128
TIMER/CLOCK button :
Clock Setting: Normally display the clock set currently (display 12:00 for the first electrifying or
resetting). When press the button for 5 seconds, the time display zone will flicker, then press
【
+
】
and
【
-
】
button to adjust hour that uses 12-
hour clock including “A.M.” and “P.M.” time; press the button
again to complete the setting.
Timer setting:
Press the button to set TIMER ON/OFF , press the button then “ON” will flicker on the
display screen. then press
【
+
】
and
【
-
】
button to adjust timing time; press the button again to complete
the setting. The “OFF” setting is the same methods.
Remark: When setting functions such as mode, temperature, fan speed, display screen
displays all presetting parameters and remains constant; after re aching presetting time, air
conditioner will automatically start as per presetting state.
After setting timing ON and OFF function, pressing button of
【
Timer/Clock
】
can cancel timing
setting.
SLEEP button :
1. Press the button to the sleeping indicator light of indoor unit flashes on;
2. In sleeping mode,the cooling operation enables the set temperature to increase 1
℃
after 1 hour and
another 1
℃
auto matically after 1hour.
3. In sleeping mode,the heating operation enables the set temperature to drop 2
℃
after 1 hour and
another 2
℃
auto matically after 1hour.
The air conditioner will cancel sleeping mode automatically after running in this mode for 7 hours.
4. Remark:
Press the mode or ON/OFF button,the remote controller will cancel sleeping mode.
SCREEN button :Press the button to let the LCD display working or not.
Remote conntroller:H series LCD display instruction
POWER button
:Switch the unit ON/OFF.
MODE button
:Select mode , push the button one time, then the operation modes will change in turn as
Auto-Cooling-Dehumidify-Heating
TEMP + button and TEMP - button : Temperature adjustment range: 16~32
FAN button : Change the fan speed will change in turn as: Low-Medium-High-Auto
NOTE
：
ON/OFF display:
when the remote controller is on the
state, the LCD will be display or not.
Digital display:
Under normal working state, it
displays setting temperature. While the
feeling function is start, it will display
room temperature, and under the state of
timer mode, it will display setting timer.
NOTE:
Fan speed operation
When the air volume is greater, the
noisewill be higher, The wind
temperature willrise when cooling
mode,and drop whenheating mode;
Please selecte the appropriate Fan
speed, to achieve the more
comfortable rest environment
.