AUX AMCA-H09/4R1A, Service Manual

Page: 127 / 142

AUX DC Inverter 1 Drive1 50HZ R410A Sensorresistance table
127
*Note:Theunitwillturnoffautomaticallyifthetimingmodeisrunningout oftime.
16.Twowhitebutton: Addressing set
*Withthecontroller off, pressing thetwowhite button simultaneouslymorethan10 secondsor
more toenter addresssetting.Thisstatusdisplaysonlytemperature
andtimeparameters,temperaturedisplayare a
show
“Serialnumber"parameters,therangeis0-99.Time
displayareashow"Setvalue",therangeis0-255.The initialvalueis1.
* Bypressing
“
/
”tosetserial and-. Parameterwithintheserialnumberdisplays from0to 99
incirculation.
* Bypressin
g“
ECO
” and“
iCLEAN
”to setvalue
and-.Parameterswithinthevaluenumberdisplays from0
to255incirculation.Aftersettingthe two numbers, presstheMODEbuttontoconfirm
sendingtoODU.
Remoteconntroller: K series
POWER button :Switch the unit ON/OFF.
MODE button
:Select mode , press the button one time, then the operation modes will change in turn as
Auto-Cooling-Dehumidify-Heating
TEMP + button and TEMP - button : Temperature adjustment range: 16~32
FAN button : Change the fan speed,press the button one time then the fan speedwill change in turn as:
Low-Medium-High-Auto
SWING button 1 : Press this button for the first time when operation, it will start the up and down swing
function. Press the button for the second time, cancel the swing function.
SWING button 2 : Press this button for the first time when operation, it will start the right and left swing
function. Press the button for the second time, cancel the swing function.
Feeing button: Press this button for setting the feeling function.The LCD shows the actual room
temperature when the function is set and it shows the setting temperature when the function
iscancelled.The function is invalid in the fan mode.