Input Board
A circuit board that receives video, audio, or data signals from outside
sources.
L
LCD (Liquid Crystal Display)
The screen on the CP-10 Control Panel for user interaction.
Level
A level is a set of input and output signals that are grouped and,
therefore, switch together. In a configuration file, a level is referred to as
a “virtual matrix.”
Local Preset
A pre-defined set of signal routings that can be executed at any time.
Presets are defined in the configuration file.
M
Matrix Switcher
The hardware and software necessary to switch signals. Matrix switchers
are also known as routing switchers or routing matrices.
O
Output Board
A circuit board that routes input signals to specified destinations.
Output Connectors
(see Input and Output Connectors)
P
Power Supply
Contains a power switch, a power connector, the fuse drawer, and the
main power supply fan vent.
S
SBC (Single Bus Controller)
Devices for controlling the input to a specified output device. For more
information see the SBC documentation.
Serial Connector
A 9-pin female connector on the rear of an enclosure used to connect
serial external control devices connect to the matrix switcher.
Installation and Setup Guide
