Executing Local Presets
A local preset is a set of switches stored in each enclosure’s
configuration information. You can execute a local preset at any time.
Local presets are not programmed when we ship your system, so before
executing any, contact your AutoPatch dealer to program them. An
8Y-XL can store hundreds of local presets. You can enter commands to
execute Local Presets from the following:
ä
CP-10 Control Panel
ä
CP-10 Remote Control Panel
ä
An external controller (computer, AMX, Crestron, etc.)*
via BCS (Basic Control Structure) commands
The CP-10 Remote Control Panel works the same as an attached control
panel.
*AutoPatch provides, at no charge, an interface library for various
controllers. This library is called the X
N
Net Communication Library.
This library, documentation, and programming examples are available
upon request from your AutoPatch representative.
Operation Manual
4-1
