You can disconnect switches through a device that can connect to one of
the RS232 connectors on the CPU.
Caution:
Disconnecting an input disconnects
all
the outputs receiving
that input signal.
To disconnect a switch
, enter the command using the following
command line format, where “
#
” represents any valid level, input, or
output number.
DL#O#T or DL#I#T
To cancel an incomplete BCS command
, enter the “
X
” command at
any time.
Examples:
BCS Command
Action
DL0O3T
Disconnects output 3 on Level 0
DL1O6 8 21T
Disconnects outputs 6, 8, and 21 on Level 1
DL2I5T
Disconnects
all
outputs connected to input 5 on Level 2
DL3I7 9 15T
Disconnects
all
outputs connected to inputs 7, 9, and 15
on Level 3
DL3OX
Cancels the incomplete command
Note:
In each disconnect switch command, you can enter multiple
inputs or outputs by including a space between each input or output
number.
5-2
Operation Manual
Disconnecting Switches
