6. Remove the extender board alone by pushing down on the daughter
board side of the extender board arm while pulling the board out (see
graphic below).
Note:
Only use the extender board while adjusting the gain. Do not
continue using the extender board during normal operation.
7. Return the enclosure to its original state.
If you need to remove the switching board, remove the extender board
and the switching board together by pulling up on the daughter board
side of the extender board arm while pulling the boards out (see graphic
below).
9-4
Installation and Setup Guide
Adjusting Gain
Adjusting
Gain
OUTPUT
OUTPUT
42
41
43
44
51
49
50
52
+
23
24
30
31
32
+
OUTPUT
OUTPUT
42
41
43
44
51
49
50
52
+
23
24
30
31
32
+
