To use the CP-10 Control Panel
, use the keys to choose commands and
values from the Command Screen.
To choose a command,
push the key that corresponds with the one you
want to choose.
To select values for fields (such as Level, Source, Destination, and
Preset values),
use the number keys.
Number Keys (0-9)
Use the number keys to enter digits when choosing front panel menu
items (instead of scrolling down the lists), entering input, output, and
local preset numbers, and entering digits for any other functions that may
require numbers.
Arrow Keys
Use the arrow keys to scroll left and right through long lists of outputs.
The arrow keys are required only when an arrow graphic is displayed on
the front panel’s LCD screen.
Cancel Key
Use the Cancel key to abort a command that is incomplete. If you make a
mistake while entering a command, press the Cancel key to remove the
partially entered command from the screen and enter the correct
command. The Cancel key cannot undo a completed operation.
Take Key
The Take key is much like the Enter or Return key on a computer
keyboard. Pressing the Take key tells the system to execute the chosen or
entered command.
Status Key
Use the Status key to query the system for signal routing information and
switch verification. See Chapter 3 for more information on status
operations.
Level Key
The Level key prepares the system to receive a level identification
number as the next entry.
Operation Manual
1-3
Front of Enclosure
