ä
Reconnect
either a source or destination channel that has been
disconnected by selecting it.
Click the Reconnect button.
The channel is now available again for assignments.
Note:
Reconnecting does not re-establish previous presets.
To delete an existing preset:
1. In the Virtual Matrices view, go to the Edit menu and select Manage
Local Presets.
2. Select the preset from the Existing Preset list that you want to delete.
3. Click the Delete Preset button. A message appears asking if you are
sure you want to delete the preset.
4. Click OK to delete the preset and return to the Manage Local Presets
dialog box.
Note:
Presets are not implemented until the modified configuration file
is downloaded (see Section 8.4) to the system.
Modifying Groupings
The process for modifying groupings takes you through two dialog boxes
that allow you to assign connectors individually to a single channel’s
signals or to a group of channels by pattern.
Manage Virtual Matrix Groupings
Use the Manage Virtual Matrix dialog box as a central point from which
to assign signals to connectors, thereby creating virtual source and
destination channels (sets of signals that will switch together because
they have been grouped together). Even though you must click the
Accept Groupings button to accept the new groupings, they are not
implemented until the modified configuration file is downloaded (see
Section 8.4) to the system.
8-8
Installation and Setup Guide
Managing Configuration Files
Configuration
Files
