To attach audio inputs and outputs,
unscrew the clamps on the audio
connector, insert the proper wire, and re-tighten the clamps so they hold
the wire tightly and make proper connections. The graphic below shows
balanced audio connections, and the graphic on the next page shows
unbalanced audio connections.
Note
:
For audio signals using twisted pair wire, connect the shield only
at one end to minimize low frequency noise.
Installation and Setup Guide
4-3
Attaching Input and Output Cables
Inputs
and
Outputs
+GND-
33
34
35
36
37
39
38
40
INPUT
+GND-
33
34
35
36
37
39
38
40
OUTPUT
Balanced audio connections
Input
Signal Direction
Signal Direction
Output
