CP-10 Control Panel
A CP-10 Control Panel has 29 keys – 10 number keys for entering digits,
4 directional arrow keys, and 1 each of the following: Cancel, Take,
Status, Level, Change, Input, Output, Preset, Program, Backlight, Space,
Special, Undo, Comma, and Period (the last four are not implemented).
To use the CP-10 Control Panel
, use the keys to choose commands and
values from the Command Screen.
To choose a command,
push the key that corresponds with the one you
want to choose.
To select values for fields (such as Level, Source, Destination, and
Preset values),
use the number keys.
Number Keys (0-9)
Use the number keys to enter digits when choosing front panel menu
items (instead of scrolling down the lists), entering input, output, and
local preset numbers, and entering digits for any other functions that may
require numbers.
Arrow Keys
Use the arrow keys to scroll left and right through long lists of outputs.
The arrow keys are required only when an arrow graphic is displayed on
the front panel’s LCD screen.
Installation and Setup Guide
1-3
Front of the Enclosure
Unpacking
SPECI AL PRESET PROGRAM
BACKLI GHT
UNDO
TAKE
CANCEL
SPACE
1
2
3
6
5
4
7
8
9
I NPUT
OUTPUT
STATUS
LEVEL
CHANGE
power
Front view of an 8Y-XL enclosure with a CP-10 Control Panel
LCD Screen
Arrow Keys
