Group Connectors by Pattern
The Group Connectors by Pattern dialog box allows you to group signals
with connectors in either a spanning or sequential pattern, thereby
creating a large number of virtual source and destination channels
simultaneously. Choose the spanning pattern to create groupings with
blocks of similar signal types; for example, plug all the red in RGB into
adjacent connectors on the matrix. Choose the sequential pattern to
define groupings where each aggregate signal is plugged in next to each
other in the matrix.
Note:
This dialog box can only be accessed from the Manage Virtual
Matrix Groupings dialog box; select it from the Edit menu after selecting
the target virtual matrix.
To specify details about the pattern:
1. Choose the pattern type by clicking either the Spanning or Sequential
button.
2. Choose the channel type by clicking either the Sources Only or
Destinations Only button.
The destinations can mirror the sources by clicking the Mirror
Directions check box.
8-10
Installation and Setup Guide
Managing Configuration Files
Configuration
Files
