To parallel inputs
, split an input signal between two or more input
connectors on different enclosures.
To minimize signal degradation when splitting a video input signal,
make sure the matrix is equipped with high impedance I/O boards. With
the exception of one board, all of the boards among which the signal is
split must be high impedance. For example, in the system pictured on the
previous page, the I/O board in the top enclosure should be 75
W
and the
board in the bottom enclosure should be high impedance. You can order
high impedance boards from AutoPatch.
Caution:
Do not split an input signal between more than four connectors
without a line amplifier.
4-6
Installation and Setup Guide
Attaching Inputs and Outputs
Inputs
and
Outputs
