6. Press the Output key.
The cursor appears after the Output prompt.
7. Enter the number of the output you want to receive the specified
input.
If, at any time, you enter an incorrect number, press the Cancel key
and enter the entire sequence again.
Note:
If you want to switch an input to a large group of outputs, enter
no more than 33 outputs at a time and be sure to press the Space key
between each output. If you enter more outputs than can fit on the control
panel screen, the Output prompt slides to the left, so the most recent
output entered is on the screen.
8. Press the Take key.
The input is routed to the specified output(s) and the Command
screen appears.
Note:
To return to the Command screen without executing the switch,
press the Cancel key.
2-4
Operation Manual
Executing Switches
