Change Key
Use the Change key to switch signals. Press the Change key and the
Change menu appears, prompting you for information about the switch
you want to perform. See Chapter 2 for more information on executing
switches.
Input Key
The Input key prepares the system to receive an input identification
number as the next entry.
Output Key
The Output key prepares the system to receive an output identification
number as the next entry.
Preset Key
Use the Preset key to implement a local preset. See Chapter 4 for more
information on executing presets.
Backlight Key
The Backlight key illuminates the LCD. The backlight remains
illuminated for approximately 20 seconds; however, you can turn it off
before the 20 seconds are up by pressing the key again.
Space Key
Use the Space key to insert a space between multiple outputs or multiple
local presets when entering a command; the output and local preset
prompts are the only prompts that accept multiple entries.
Special, Program, Undo, Comma (,), and Period (.) Keys
These keys are not implemented at this time.
1-4
Operation Manual
Introduction to the 8Y-XL
