3.1 Verifying Signal Status
Using the CP-10 Control Panel
Input status and Output status both function on the CP-10 Control Panel
and in BCS commands (see page 3-4). You can return to the Command
screen at any time by pressing the Cancel key.
The following example verifies signal status for input 2 on level 0.
To verify input signal status using the CP-10 Control Panel:
1. At the Command screen, press the Status key.
The Status screen appears.
2. Press the Level key.
The cursor appears after the Level prompt.
3. Enter the number of the Level where the input is connected.
3-2
Operation Manual
Verifying Signal Status
