Unpacking Tips
q
Before fully unpacking the enclosure(s),
examine the shipping
box(es) for any signs of damage
. If a box is partially crushed or any
sides have been broken open, notify the shipping agency
immediately and contact your AutoPatch Salesperson or
Representative.
q
Once unpacking is complete, closely check the physical condition of
the enclosure(s).
q
Collect all documentation and envelopes.
Note:
AutoPatch is not responsible for damage caused by insufficient
packing during
return
shipment to the factory. Upon request, AutoPatch
will supply new shipping boxes at cost.
1.1 Front of the Enclosure
Enclosures are the structural basis of an 8Y-XL Distribution Matrix.
Since AutoPatch matrix switchers are custom-built for each installation,
factors such as control method, signal type, and potential switches affect
the appearance and weight of each enclosure.
An enclosure can have a blank front panel or a CP-10 Control Panel (a
front panel that is produced by AutoPatch and has an LCD screen and
keys for entering commands). Although a CP-10 Control Panel is
optional, we recommend one on at least one enclosure in the system for
system verification, redundant control, and troubleshooting. The CP-10
Control Panel can be attached or removed as needed.
1-2
Installation and Setup Guide
Unpacking the 8Y-XL
Unpacking
