Attaching Inputs and
Outputs
Inputs and outputs attach to the input and output connectors on the rear
of each enclosure. Inputs attach to the connectors on the upper part of the
enclosure, and outputs attach to the connectors on the lower part of the
enclosure. The input and output connectors are numbered separately. The
numbering starts at the top left and goes across two connectors. This
pattern repeats downward to the bottom of the section and then continues
from the top on the remaining two sets of connectors on the right.
Connectors on an 8Y-XL enclosure could include:
Signal Type
Connector Type
Analog audio
(balanced or unbalanced)
Pluggable 3 position terminal block
Digital audio
BNC
Analog video
BNC
Digital video
BNC
Sync
BNC
Installation and Setup Guide
4-1
Inputs
and
Outputs
