6. Review the Readme.txt file found on either Disk 1 or after
installation in the default install location C:\AutoPtch\Connect\.
To launch X
N
Connect:
1. From the Start menu, select Programs.
2. Select AutoPatch Applications (or any other file group you selected
during the install).
3. Select the Connect file group.
4. Select the Connect program.
The X
N
Connect program opens.
8.3 Panes, Views, and Dialog Boxes
X
N
Connect displays two panes. The graphics are located in the left pane
and the properties of the currently selected graphic are in the right pane.
At the top of the left pane, you can access the different graphical
representation views from two tabs: Hardware and Virtual Matrices.
Hardware, such as enclosures and control panels, appear in the Hardware
view and existing virtual matrices appear in the Virtual Matrices view.
As you switch from view to view, the properties displayed in the right
pane automatically change to correspond to the new graphics.
Installation and Setup Guide
8-3
Panes, Views, and Dialog Boxes
Configuration
Files
