Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual

Page: 994 / 1304

■ Put on Drawing: Opens the Table Generation Setup dialog box for
specifying how to display your report as a table on your drawing.
■ Sort Fields: Controls the sorting order of the fields in the report.
NOTE The options are saved in the format file after you click OK on the sub-dialog
boxes. If you are working in an unnamed format file, you have to save the data
after you select Done in order to keep the changes you have made.
Breaks
■ Special breaks: Specifies the value that controls the section break. The
drop-down list displays the report-specific content to apply to the special
break.
■ Add Special break values to header: Adds the special break value to the
page header. For example, if you select a special break of
Installation/Location, the values provided for these devices in the schematic
are displayed in the report section header.
Format File
Format files define specific criteria applied to the report prior to generating
the report to screen, printer, file, or automatic generation. The format files
are saved to the 'Documents and Settings\{user name}' sub-directory.
■ Open Format File: Selects format files to edit. The Report Format Settings
File Selection dialog box opens and displays a list of format files (.set) in
the user sub-directory. Select a file to edit from the list and click OK.
■ Save Format File: Saves a format file on the hard disk for later retrieval and
usage when generating reports.
■ Save As Format File: Saves a format file that you opened and modified with
a different name.
Report format file setup - schematic terminal
numbers
982 | Chapter 14 Reports