manualshive.com logo in svg

Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 1097 / 1304

Share
Download
Autodesk 22505-051400-9000 - AutoCAD Electrical 2008 User Manual Download Page 1097

Access database file (footprint_lookup.mdb). There is a table for each
manufacturer code.

Access:

Click the arrow on the Miscellaneous Panel Tools tool to access the Footprint
Database File Editor tool.

From the Panel Layout menu, select Database File Editor 

 ➤ 

 Footprint Database

File Editor.

Each entry in the table maps a given part number to its footprint block name.
The table name must match the manufacturer code.

Opens a sub-dialog box for editing existing manufacturer
footprint lookup tables.

Edit existing table

Opens a sub-dialog box for creating new manufacturer
footprint lookup tables.

Create new table

Opens a sub-dialog box for creating a blank footprint
lookup file. This option is available if a Footprint_look-
up.mdb file does not exist in the designated location.

Create empty file

Footprint lookup

This tool allows you to examine the records and, modify, delete or add records.

Access:

Click the arrow on the Miscellaneous Panel Tools tool to access the Footprint
Database File Editor tool. Select the Edit Existing Table button, select the table
to edit, and click OK.
From the Panel Layout menu, select Footprint Database File Editor. Select the
Edit Existing Table button, select the table to edit, and click OK.

Opens a sub-dialog box for editing an existing record. Highlight the
record and click on the Edit button. Modify the record in the displayed
sub-dialog.

Edit record

Removes an existing record.

Delete

Use the footprint lookup file | 1085

Summary of Contents for 22505-051400-9000 - AutoCAD Electrical 2008

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments