Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 696 / 1304

end of the wire is placed on the drawing and the Wire It command is run
again.
■ When neither connection for a wire are on the active drawing, the wiring
command is ignored until you add the connectors into the drawing file.
NOTE If the AutoCAD Electrical drawing is missing one end of the connector or
if a connection was not found, wiring information is displayed next to the pin and
the information is written into a log file so you know AutoCAD Electrical was unable
to resolve the wire connections in the drawing. The log file name is {drawing
filename.LOG} and is found in the same folder as the drawing file.
Insert
Upon selection of one or more rows in the grid display, this button is enabled.
Once selected, the parametric connector program launches to create a
connector image in the drawing.
Places one connector at a time and returns to the Connect-
or Selection dialog box with the connector row marked as
'x.' Single row selection
Places the selected connectors in consecutive order. Steps
through the list of connectors previously selected in the Multiple row selection
dialog box, placing them in the drawing one at a time.
After the connectors are created the Connector Selection
dialog box displays with the connector rows marked as 'x.'
684 | Chapter 10 Point-to-Point Wiring Tools