Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 812 / 1304

flags "Form-C", "8" is the common pin, "5" is the NO pin, and "6" is the NC
pin.
PEER_COILPINS, PEER_PINLIST
There can be two additional "PEER_" fields in the _PINLIST table for defining
special cases where a single part number calls out two parent devices. For
example, a reversing motor starter part number might include two parent
contactor coils, one for forward and one for reverse. Each parent coil symbol
needs to have its own pin list assignment. You set up the second coil's coil
pins and pin list data in the PEER_COILPINS and PEER_PINLIST fields for the
common part number.
■ PEER_COILPINS : Terminal pin numbers for peer coils.
■
PEER_PINLIST : Contact type and pin numbers.
Set pin list assignments for special uses
You can set up subcategories of type 4 pin combinations so that some will
apply to specific contact types and other pin combinations to other contact
types. You can also use a type 4 PINLIST assignment to track and control how
many schematic terminal symbols can be tied to a given terminal tag-ID.
For filtering of special contact use
You can set up subcategories of type 4 pin combinations so that some will
apply to specific contact types and other pin combinations to other contact
types. Encode the Pin List entries with a "4" plus a character to provide further
filtering of what contacts are available for a given child contact. At the contact
end, make sure that an attribute PINLIST_TYPE (or Xdata of the same name)
carries a value of "4" plus a character to match up with the coding in the pin
list string.
For example, a given device has 5 N.O. contacts but they are not all the same.
Three of them are motor contacts and 2 are auxiliary control contacts. Two
different schematic symbols are created - one to be used to show the heavy-duty
motor starter contacts and another symbol to be used for auxiliary contacts.
Set up the motor starter contact symbol with attribute PINLIST_TYPE with a
value of "4C" and the auxiliary contact symbol with PINLIST_TYPE value "4A."
Now, in the _PINLIST database table, encode the part number's pin list
information with type "4" entries but use "4A" and "4C" to differentiate which
800 | Chapter 13 BOM and Catalogs