Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 249 / 1304

Use this to define the outer box dimensions of the module. The box dimensions
are calculated from the insertion point of the parametrically-built PLC symbols.
Access:
Click the drop-down arrow on the Insert PLC (Parametric) tool to access the
PLC Database File Editor tool. Click the New Module or Module Specifications
button, and then click the Module Box Dimensions button.
From the Components menu, select Insert PLC Modules
➤
PLC Database File
Editor. Click the New Module or Module Specifications button, and then click
the Module Box Dimensions button.
NOTE A value for the Split Top and Split Bottom dimensions must be set before
you can specify their line properties.
Module Box Dimensions
NOTE You must enter at least one of the Top, Bottom, Left or Right dimension
values in order to assign settings specific to this module.
Sets the right, left, top, and bottom offsets for the rectangle that surrounds
the module. The optional Split Top and Split Bottom specify the offsets for a
split module where Split Top specifies the offset for the top of a split module
and Split Bottom specifies the offset for the bottom of the split module. If left
blank, AutoCAD Electrical will use the rectangle Top and Bottom values.
Line Properties
Sets the properties for the lines that make up the box. You can set the color
and line type using the properties fields. To predefine the color, enter "COLOR
colorname" into the box. For line type, enter "LTYPE linetypename" into the
box. See the CHPROP command in the AutoCAD Help for more information
about the various properties you can set.
Select terminal information
Use this to add or modify the type of terminal being used. You can select
multiple fields to edit at the same time by dragging your mouse across
Overview of the PLC database file | 237